USB Smart home

(Afhængige af at være installeret på en PC/Server som er tændt for at kunne styre systemet.) Manual Klik Her Z-Wave controlleren Everspring sluttes til en USB-port på din computer eller andet der kan køre en zwave sofware. Denne controller er kompatibel med Z-Wave API Sigma Designs, og så med mange software: - HomeSeer - IP Symcon - Embedded Automation (mControl) - 4HomeMedia - ControlThink - Jeedom - Domoticz FUNKTIONER: Tilslut dit Z-Wave netværket til din computer Bestil dine Z-Wave-moduler med din computer tovejs kommunikation Kompatibel med flere software som HomeSeer eller Jeedom Integrerer Z-Wave-chip serie 500 (Z-Wave +) SPECIFIKATIONER: Modul Type: Z-Wave Transmitter Effekt: 4,75-5,25 V (via USB) sendefrekvens: 868,42 Mhz Rækkevidde: op til 100 m udendørs Interface: USB Temperatur: -10 ° C - 50 ° C Luftfugtighed: 85% Dimensioner: 20.7x11.3x58.8 mm Vægt: 8g Z-Wave Certificering: ZC10-16055063 Introduction To Z-Wave Plus™ Z-Wave Plus™ is a new certification program designed to help consumers identify products that take advantage of the recently introduced 'Next Gen' Z-Wave hardware platform, also know as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up. Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the Next-Gen, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities, including increased range, extended battery life, Over The Air upgrading (OTA), additional RF channels and more -- all of which are fully backwards compatible with existing Z-Wave products. For consumers, homeowners, integrators, and service providers, these enhancements offer tremendous benefits in terms of shorter and easier installations, richer device profiles...Vis mere

(Afhængige af at være installeret på en PC/Server som er tændt for at kunne styre systemet.) This USB Stick connects a PC or any other computing platform with USB interface to a wireless Z-Wave network. The device already contains a license to run Z-Way, the certified Z-Wave Controller software available for various operating systems and platforms. This stick and Z-Way work with all certified Z-Wave devices regardless of its vendor or date of origin. Just plug in the USB stick to your Windows or Linux machine or Raspberry Pi and download Z-Way from http://razberry.zwave.me/z-way-server/. In short UZBWAY = UZB1 + Z-WAY SPECIFIKATION: Radio protokol: Z-Wave, Radio Frekvens: 868 MHz for EU, Rækkevidde op til 30 m indendørs (afhængigt af bygningen), Introduction To Z-Wave Plus™ Z-Wave Plus™ is a new certification program designed to help consumers identify products that take advantage of the recently introduced 'Next Gen' Z-Wave hardware platform, also know as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up. Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the Next-Gen, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities, including increased range, extended battery life, Over The Air upgrading (OTA), additional RF channels and more -- all of which are fully backwards compatible with existing Z-Wave products. For consumers, homeowners, integrators, and service providers, these enhancements offer tremendous benefits in terms of shorter and easier installations, richer device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logo...Vis mere

Hent Fibaros installations manual ENG klik her. Walli N USB-udgang FGWU-021 DIMENSIONER Højde 86 mm Bredde 86 mm Dybde 42 mm Forsyning OG INSTALLATION Strømforsyning 100-240V ~ 50/60 Hz Intern beskyttelse output overspændingsbeskyttelse kortslutninger beskyttelse termisk afbrydelse Strømforbrug i standbytilstand maks 0,3W Anbefalet tværsnitsareal af ledninger 1.5-4.0mm2 Til installation i EU dåser Ø = 60 mm dybde ≥ 40 mm Driftstemperatur 0-40 ° C Omgivende luftfugtighed 0-90% RH uden kondensering DEVICE APPLICATIONS Produktion 2x5V DC max 2400mA total Antal udgange 2Vis mere

(Afhængige af at være installeret på en PC/Server som er tændt for at kunne styre systemet.) Product information "Z-Wave USB Dongle for ZIP Stack by Silicon Labs" This USB Stick connects a PC or any other computing platform with USB interface to a wireless Z-Wave network. The platform must run a Controller software based on Z/IP from Silicon Labs. One example is Z-Ware from Silicon Labs, available free of charge from their website. This stick works with all certified Z-Wave devices regardless of its vendor or date of origin. The device implements a virtual serial interface used by the Z-Wave application. Linux and Mac OSX has a built in device driver for the stick and will create a new device named like /dev/cu.usbmodemfa131 (OSX) or /dev/ttyACM0 (Linux). Windows enumerates a new COM device but may require a device driver uzb.inf available at www.z-wave.me. Technical Data: USB/Z-Wave: VID/PID: 0658/0280 ; Z-Wave Role: Bridge Controller; Z-Wave SDK: 6.71 (Z-Wave Plus); Z-Wave Cert: ZC10-14090020 Wireless Transceiver: Antenna: Helix; TX Power: +1 dBm; RX sensitivity: -104 dBm (9.6kbps) ... -95 dBm (100kbps) Wireless Range: up to 250 m in open field, > 40 m in rooms Transceiver Hardware: Silicon Labs ZM5101 The following downloads are available online Manual ZMEEUZBZIP CE Declaration Image 1 Article Dimensions (WxHxL) 16.8 x 8 x 34.69 mm Package Dimensions (WxHxL) 40.5 x 20.8 x 63 mm Article net weight 0.003 Kg Article gross weight 0.010 Kg Z-Wave Plus WEEE CE IP-Rating IP20Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( JA ) HOMEY ( JA ) NEXA ( ? ) Razberry ( ? ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( JA ) HG2 ( ? ) Samsung SmartThings ( Ja ) Smart Switch 6. Med USB lader og energimåling Smarter. Smaller. Smart sockets. Plug it into any power outlet in your home and that outlet is instantly smarter. Smart Switch 6 is a smart plug that lets you wirelessly control whatever is plugged into it. You can do that via remote control or a smart phone, and from an automation schedule or from the power outlet itself. Now your wall socket is smarter and connected. And because it’s truly smart, Smart Switch 6 offers much more than just wireless control. Wireless control. Control it via remote from up to 150 metres away from anywhere in the world via a smart phone or tablet. Smart Switch 6 can be controlled using secure and encrypted wireless technology. Babysitter. Control whatever is plugged into a Smart Switch 6 via a schedule and ensure that gaming systems and computers aren’t used when they’re not meant to be. Automation. Convenience. Cost savings. Our electronics don’t have to be turned on all the time, just the times we use them. Smart Switch 6 lets you automatically turn devices on or off according to a schedule you choose. Safety. Turn your electronics off in the event of an emergency or a hazard. Smart Switch 6 lets you automatically turn off devices, such as leaking air conditioners and fridges, when they fail. Spend less. Monitor and understand exactly how much money the devices plugged into Smart Switch 6 are costing you to run, then create a schedule to reduce your electricity bill. Protect devices. Your expensive electronics are safe with Smart Switch 6 courtesy of its inbuilt surge protector and over-current protector. Save on what you spend. Smart Switch 6 has world-class energy monitoring technology built right in. In real-time it can understand how much electricity your devices are using and let you ...Vis mere

Virker Med : Home Center Lite ( ? ) Home Center 2 ( ? ) HomeSeer ( ? ) HOMEY ( JA ) NEXA ( ? ) Razberry ( ? ) Vera ( ? ) Zipabox ( JA ) ZNet Lite V1/V2 ( ? ) HG2 ( ? ) Samsung SmartThings ( Ja ) Smaller, but smarter The Smart Dimmer 6 is an intelligent adapter plug which can be switched and dimmed by mobile remote control, wall switch, smartphone or through automation. Thanks to Z-Wave the Smart Dimmer 6 is more than an ordinary socket. The Smart Dimmer 6 owns a superb energy monitoring which provides consumption data of the connected device in real-time to your Z-Wave control center. This data can be stored also to present it in a history diagram later. Besides a colored LED ring at the Smart Dimmer shows the energy consumption of the connected device. The LED ring can be configured as follows: Disabled: The LED ring is switched off permanently Bicolored: Blue shows that the connected device is switched on; White shows that it is switched off 16 milion colors: Colors vary from Blue to Yellow, Green up to Red (Blue shows low, Red shows high energy consumption of the connected device.) The Smart Dimmer 6 has a dimension of only 58 x 58 mm and is therewith 43% smaller than its forerunner - however it is smart and practical. In a time when tablets, smartphones and many other devices can be charged with power via USB it is obvious that Smart Dimmer 6 owns an additional USB port alongside. The Smart Dimmer 6 works with the newest Z-Wave 500 chip generation and can dimm devices up to 2.5A / 550 watt. Smart Dimmer 6. Lamp light. Perfected. Smart dimmer. Lamps aren’t just decorations in the home; they’re a functional and frequent part of the day. Used to avoid flooding a room with ceiling lights. Used to read by. Used as the backdrop for a movie. The lamps we have and how we use them are as personal and individual as the décor they’re a part of. Smart Dimmer 6 has been crafted to subtly modernise the lamps in your home, making them smarter. Dimming. It’s not enough to fi...Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( ? ) HOMEY ( Ja ) Se mere her NEXA ( JA ) Razberry ( JA ) Vera ( JA ) Zipabox ( JA ) Ingen energimåling ZNet Lite V1/V2 ( JA ) HG2 ( ? ) HOMEE-0002 ( Ja ) Smartthings ( ? ) Openhab ( ? ) Indigo ( ? ) Domoticz ( ? ) Z-Wave + smart socket Denne smart Plug er et Z-Wave-modul, der simpelthen installeres mellem den enhed, der skal styres, og en stikkontakt. Det giver mulighed for at styre (tænd / sluk) af enhver type elektrisk enhed eller belysning fra dens knap lokaliseret lokalt eller fra enhver kompatibel Z-Wave controller. Inkluderer også forbrugsmålingsfunktionen, denne stikkontakt signalere wattet eller energiforbruget i kWh til Z-Wave controlleren. Desuden vil forbrugsniveauet for den tilsluttede belastning indikeres visuelt af de integrerede RGB-LED'er, der skaber en lysring. Disse RGB-LED'er kan også indikere signalkvaliteten mellem jack og Z-Wave-controlleren, når Z-Wave Scope Test-funktionen anvendes. Hank Z-Wave + smart plug er udstyret med 2 USB-porte (1A og 2.4A), der kan opladere smartphones eller tabletter. Dette Z-Wave-modul fungerer også som en trådløs repeater med andre moduler for at sikre total dækning af dit hjem. En Z-Wave controller (fjernbetjening, dongle ...) er påkrævet for at integrere dette modul i dit netværk, hvis du allerede har et eksisterende netværk. FUNKTIONER: Styr en lampe eller en enhed eksternt Plug-modul, der integrerer direkte mellem en stikkontakt og den belastning, der skal styres ON / OFF funktion til styring af lamper eller enheder (ingen variation) Måling af øjeblikkeligt og kumulativt forbrug Lokal belastningskontrol via integreret knap 2 USB-porte til opladning af smartphones eller tabletter Z-Wave Scope Test Funktion Angiver forbrug i realtid takket være sin ring af lys (7 farveniveauer) Overbelastningsbeskyttelse Sikkerhed for radiokommunikation via AES-128 kryptering Integrerer Z-Wave 500-serien chip Firmware opdateringer over luften (OTA) Z-Wave mes...Vis mere

Compactpower, strømforsyning, indgangsspænding 100-240V AC, 92W; 24VDC; 24÷25.5VDC; 3.83A DIN skinne montering Datablad KLIK HER Tekniske detaljer & specifikationer AttributeValue Ac- eller dc-indgangsspænding Ac, Dc Ac- eller dc-udgang Dc Indgangsspænding min. 85 V ac, 120 V dc Indgangsspænding 85 → 264 V ac, 120 → 370 V dc Indgangsspænding maks. 264 V ac, 370 V dc Udgangsspænding 5 V dc Udgangsspænding maks. 5V dc Udgangsstrøm 6.5 A Mærkeeffekt 60W Antal udgange 1 Antal faser elektriske 1 Type Switch-mode område Ultraslank Højde 90mm Dimensioner 52.5 x 54.5 x 90mm Bredde 52.5mm Monteringsform DIN-skinne Spændingsændring ved belastning ±1% Standarder overholdes I overensstemmelse med RoHS, TUV EN 60950-1, UL 508 Effektivitet 85% Vægt 190g Temperatur maks. +70°C Beskyttelsesfunktioner Kortslutningsbeskyttelse, Overbelastningsbeskyttelse, Overspændingsbeskyttelse Maks. indgangsstrøm 1.2A Dybde 54.5mm Netspændingsudfald 12 (115 V ac) ms, 30 (230 V ac) ms Indgang elektrisk fase 1 Type af effektsignalkonvertering AC/DC-DC Serie HDR MTBF 927.6kh Justeringsområde på udgangsspænding 5 → 5.5V Spændingsændring ved ændring af netspænding ±1% Anvendelse Bygningsautomation, Elektromekanisk udstyr, Fabriksautomation, Industrielt kontrolsystem, System til automation i hjemmet Særlige egenskaber Lille og kompakt Temperatur min. -30°C Rippel og støj 80mV Pk-Pk Indgangsfrekvensområde 47 → 63Hz Strømforsyning / konverterfunktioner: ingen belastning strømforbrugVis mere

Pre-Order delivery in August - Forhåndsbestilling levering i august Music, pictures, books and other digital media – digital world is booming. With My Cloud™ by WD you can save all of your digital content in high speed and secured at home with worldwide access and storage space in abundance. But your My Cloud™ can be much more! My Cloud™ by WD becomes the control center of your intelligent home! The Z-Wave Smart Home USB Stick turns your My Cloud™ NAS (Network Attached Storage) into a smart home control center. Thanks to Z-Wave wireless technology you are free to choose from more than 1,300 components from about 300 different manufacturers to assemble your personal smart home. Your home is getting intelligent and will make your life easier. As of now heating, window blinds, lighting and other electrical devices can be controlled by smartphone, tablet, desktop pc, laptop or remote control. Your home is getting securer and energy consumption will be reduced. Automate your home and enjoy more comfort, because the light will be switched on automatically the moment you’re leaving the bed or the heating will be activated when you’re on the way home or all electrical devices will be switched off as soon as you’re leaving home. Smart Home for everybody There is no special technical previous knowledge necessary for setup the My Cloud smart home control center. There are only three steps making your home intelligent. And that’s how it works: Plug in the Z-Wave USB stick into My Cloud™ NAS Download „Z-Way“ app over your My Cloud’s WebUI Connect Z-Wave devices with the WD Smart Home Center Your individual Smart Home Most of the available smart home components can be installed without previous knowledge. Your smart home bases on a modular concept assembled like a puzzle and you decide about the investments. The brain of your smart home is My Cloud™ NAS by WD connected with the Z-Wave wireless stick. Over the “Z-Way” app which is available for download free of charge in the My...Vis mere

(Afhængige af at være installeret på en PC/Server som er tændt for at kunne styre systemet.) This USB Stick connects a PC or any other computing platform with USB interface to a wireless Z-Wave network. A third party controller software compatible to the Sigma Designs Serial API is required to use the functions of the device. The third party software plus this UZB realize a static controller to manage and use Z-Wave devices of various vendors. This stick works with all certified Z-Wave devices regardless of its vendor or date of origin. The Sigma Designs Serial API specification is available to all owners of a Sigma Designs Z-Wave SDK. Please note that this product does not contain a license to run Z-Wave.Me’s controller software Z-Way. You can however upgrade the stick to accommodate this function using a licensing key ZME_ZWAYLIC1.. SPECIFIKATION: Radio protokol: Z-Wave, Radio Frekvens: 868 MHz for EU, Rækkevidde op til 30 m indendørs (afhængigt af bygningen), Introduction To Z-Wave Plus™ Z-Wave Plus™ is a new certification program designed to help consumers identify products that take advantage of the recently introduced 'Next Gen' Z-Wave hardware platform, also know as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up. Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the Next-Gen, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities, including increased range, extended battery life, Over The Air upgrading (OTA), additional RF channels and more -- all of which are fully backwards compatible with existing Z-Wave products. For consumers, homeowners, integrators, and service providers, these enhancements offer tremendous benefits in te...Vis mere