Aeotec Smart home

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( JA ) HOMEY ( ? ) NEXA ( ? ) Razberry ( ? ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( JA ) HG2 ( ? ) Samsung SmartThings ( Ja ) The Aeon Labs Heavy Duty Switch is used for wireless control, automate and record the power consumption of heavy loads up to 40 amps. The Device can be controlled by other Z-Wave devices and can switch his heavy loads. He also works as a repeater and can forward, if the respective device are in range, signals to other Devices. Husk at konfigurere enheden efter installationen. Skulle du få problemer, er du meget velkommen til at kontakte vores service afd. eller kigge på pdf. Installations vejledning. Vi ønsker dig held og lykke med enheden, som vi forventer, vil give dig utrolige mange oplevelser. * Kære internetbruger, finder Du same produkt billigere andre steder i DK så Matcher vi prisen.Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( ? ) HOMEY ( JA ) NEXA ( ? ) Razberry ( JA ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( JA ) HG2 ( JA ) Samsung SmartThings ( JA ) Med AEOTEC Nano Switch kan du styre (f.eks belysning, stikkontakter ...) kan integreres i et Z-Wave netværk. Således kan tilsluttes belastning kobles både trådløst via Z-Wave og lokalt via eksisterende vægkontakt. Det kompakte z-wave modul (er 60% mindre end dens forgænger Micro Smart Switch) Funktioner: Indbygnings Z-wave modul Maksimal belastning: 2300 W Integrerer eksisterende installationer (belysning, stikkontakter ...) i et Z-Wave netværk Arbejder med momentan eller vippekontakter Trådløs teknologi: Z-Wave Plus Spænding: 230V, 50Hz Ledningsføring: Nulleder kræves Effektforbrug:Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( ? ) HOMEY ( ? ) NEXA ( ? ) Razberry ( Ja ) Vera ( ? ) Zipabox ( ? ) ZNet Lite V1/V2 ( Ja ) Viser ikke temperatur HG2 ( ? ) HOMEE-0002 ( ? ) Samsung SmartThings ( JA ) Openhab ( ? ) Indigo ( ? ) Domoticz ( ? ) Produktinformation "AEOTEC Water Sensor 6" Mange mennesker beskytter deres hjem på forskellige måder med røgfølere, dørlåse og sikkerheds systemer. Men de farer, der opstår af vand bliver for det meste undervurderet. Med Aeotec Water Sensor 6 er du sikret mod vandskade. Denne sensor registrerer små mængder væsker, som kan skyldes en lille lækage i vandrøret. Et overfyldt badekar eller vask giver ikke alvorlige skader, fordi sensoren kan sende en advarsel, før det er for sent. I kombination med andre enheder i dit Z-Wave netværk kan du slukke for elektriske apparater, lukke vandventiler eller tænde pumper. Ved den kompakte form af vandføleren er det muligt at placere den næsten overalt, hvor du vil. Desuden indeholder den en vibrationssensor, der registrerer manipulations- og nødhændelser samt en temperatursensor. Hvis man ønsker at kunne måle i to områder og gerne vil kunne fast strømforsyne denne enhed, kan docking tilbehør tilbøbes Se produktet her Funktioner: Vandføler med integreret vibration og temperatursensor Detekterer små mængder væsker på 0,5 mm Kompakt størrelse Strømforsyning: 1x batteri (CR123A) Batteriets levetid: ca. 2 år Trådløs teknologi: Z-Wave Plus Hent manual ENG klik her. Artikel Dimensioner (WxHxL)40 x 40 x 115 mm Pakke Dimensioner (WxHxL)62 x 32 x 107 mm Artikel nettovægt0,062 kg Artikel bruttovægt0,132 kg Z-Wave Plus IP-RatingIP65Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( ? ) HOMEY ( JA ) NEXA ( ? ) Razberry ( JA ) Tilføj til controlleren i association group "Retransmit". Viser ikke effektmätning. Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( JA ) HG2 ( JA ) Samsung SmartThings ( Ja ) AEOTEC Nano Switch kan bruges til alle omskiftelige og ikke-dæmpbare elektriske installationer (f.eks belysning, stikkontakter ...) kan integreres i et Z-Wave netværk. Således kan tilsluttet belastning styres både trådløst via Z-Wave og lokalt via eksisterende vægkontakt. Der udover har ZW116 integreret energi måling som tillader at detektere den nøjagtige energiforbrug for den tilsluttede belastning. Det kompakte Z-wave modul (er 60% mindre end dens forgænger Micro Smart Switch) Funktioner: Indbygningsradio radiomodul Maksimal belastning: 2300 W Energimåling funktion Integrerer eksisterende installationer (belysning, stikkontakter ...) i en Z-Wave netværk Arbejder med momentan eller vippekontakter Trådløs teknologi: Z-Wave Plus Spænding: 230V, 50Hz Ledningsføring: Nulleder kræves Effektforbrug:Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( JA ) HOMEY ( JA ) NEXA ( ? ) Razberry ( JA ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( JA ) HG2 ( JA ) Samsung SmartThings ( Ja ) No more large pieces of plastic on expensive doors. Door / Window Sensor 6 is the first security sensor of its kind designed to be minimal, invisible and paintable. Easily installed, Door / Window Sensor 6 is mounted onto the corner of a door or window using double sided tape. Its custom-made, inbuilt lithium ion battery allows it to have a perfectly small profile measuring only 9mm. Door / Window Sensor 6 fills the traditional role of a security and safety sensor, providing a Z-Wave network with crucial door open / door close information in style. Product Features: Perfectly small: only 9 x 72 mm Paintable for invisible installation. Crafted from acrylonitrile butadiene styrene (ABS) plastic. Half-year battery life. Rechargeable Li-ion battery built in with 500 mAh capacity Gen5 technology using 500 series Z-Wave. Low battery notifications Wireless firmware updates. Optimized antenna range: 150 metres point to point. Door / Window Sensor 6 Any door. Any window. Any home. Invisibly. Is a door opened or closed? Is a window? Have they been opened when they shouldn’t be? Simple questions. Powerful questions. Designed to blend into any home and any décor, Door / Window Sensor 6 has been engineered to make your home smarter. Intelligence is what makes the connected home a smart one. With Door / Window Sensor 6 your Z-Wave system will have intelligence about the key doors and windows in your home. It’ll know when they’re open. It’ll know when they’re shut. And it’ll know when they’ve been opened and they shouldn’t be. Door / Window Sensor 6 will provide intelligence to 2 of the core tasks that any home intelligence system should be responsible for: its security and its control of your home. With Z-Wave your home is smarter. With Door / Window Sensor 6 your Z-Wave securit...Vis mere

Manual (English) Product information "Aeotec Siren 6" The Aeotec Siren 6 makes your home smarter and safer. The Aeotec Siren 6 enriches your Smart Home with a further safety factor. In combination with other Z-Wave devices, the visually appealing alarm siren warns of various situations with acoustic (110db) and visual signals. Whether water escapes in the cellar, smoke develops in the kitchen or an open door at night, the siren draws your attention to all these conspicuous features. You can also use the siren as a doorbell in addition to the alarm functions. The Aeotec Siren 6 plays 30 different tones, which are defined via parameters in the gateway. In summary, this device works particularly well for any type of acoustic and visual alarm in your Smart Home. The power supply of the Aeotec Siren 6 works easily via a power socket or battery operated. Due to its high-quality design, the siren fits well into your rooms and is hardly noticed. Features: Siren with acoustic and visual alarm Can also be used as a doorbell 30 preconfigured signal tones Up to 110 db Power supply: 230V Battery operation: 1x PT502035 (400mAh) (only for bridging) Safety standard S2 Wireless technology: Z-Wave Plus Article Dimensions (WxHxL) 70 x 70 x 40 mm Package Dimensions (WxHxL) 105 x 165 x 54 mm Article net weight 0.200 Kg Article gross weight 0.275 Kg Z-Wave Plus Z-Wave S2 WEEE CE IP-Rating IP20 Compatibility list Z-Wave Controller Controller Revision Article Revision Compatibility status Comment FIB_HOMEC2 4.540 1.3 partly compatible Volume not adjustable when controlled by gateway. Only 9 tones available POPE700823 2.3.4 1.3 partly compatible Volume not adjustable when controlled by gateway POPE011801 2.3.4 1.3 partly compatible Volume not adjustable when controlled by gateway ZMEERAZ 2.3.4 1.3 partly compatible Volume not adjustable when controlled by gateway ZMEEUZBWAY 2.3.4 1.3 partly compatible Volume not adjustable when controlled by gateway MCVEVERA_PLUS 040202 1.3 not compatib...Vis mere

Virker Med : Home Center Lite ( JA ) - LED setting doesn't work Home Center 2 ( JA ) - LED setting doesn't work HomeSeer ( ? ) HOMEY ( ? ) NEXA ( ? ) Razberry ( ? ) Vera ( ? ) Zipabox ( ? ) ZNet Lite V1/V2 ( ? ) HG2 ( ? ) Samsung SmartThings ( ? ) Product information "Aeotec Smart Switch 7" Smarter. Safest. Smaller still. Plug it. Automate it. Control it. Understand how much elctricity you are spending. Smart Switch 7 is Aeotec's smallest smart plug and is also everyone's safest. Intelligence is in control. Appliances turn on when needed and off when not. On a schedule. Or intelligently automated and triggered when needed. You are completely in control. It is smart because it can be automated. But it's also a smart plug because the power to turn it on or off manually is always yours. In real time and with 99% accuracy, Smart Switch 7 will analyse appliances electricity consumption helping you save what you spend. Furthermore the Smart Switch 7 is one of the best in design and quality. European design, German engineering and SGS certfication make Smart Switch 7 the smallest and safest smart plug. Features: Energy measuring function Only 42mm wide Input: 230V 50Hz Max. Output current: 10A (resistive load) Max. Output Power: 2300W Smart Start and Security S2 Standard Z-Wave Plus Energy measuring accuracy: 300W: +-1% 11A over current protection CE EN60950 and EN301489 certifictaion to protect devices against voltage strikes Standby power: 0.6W Article Dimensions (WxHxL) 42 x 42 x 70 mm Package Dimensions (WxHxL) 65 x 77 x 65 mm Article net weight 0.056 Kg Article gross weight 0.086 Kg Z-Wave Plus Z-Wave S2 WEEE CE IP-Rating IP20 The following manuals are available online Manual (English) Manual (German) Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( JA ) HOMEY ( JA ) NEXA ( JA ) Razberry ( JA ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( ? ) Samsung SmartThings ( JA ) We all know how annoying weak wireless signals can be. Weak WiFi and poor phone signals are frustrating. Imagine if your smart home was also plagued by weak wireless signals and the same frustrations? Your smart home wouldn’t be very smart. Range Extender from Aeotec ensures that your connected home stays connected. It intelligently listens to the commands and reports that your Z-Wave network sends, activelycapturing weak signals and then amplifying and repeating them. Amplifies wireless signals.Not only does Range Extender accurately repeat Z-Wave signals, it amplifies them too and helps improve the reliability and accuracy of your Z-Wave network. Big on impact. Small in size. Range Extender is a power-outlet friendly device, designed to be as small and as compact as possible without compromising on performance. so that it doesn’t block neighbouring power outlets. Mikroprocessorstyret Strømkilde 230V + / -10% 50/60Hz, Overholder UE requlations: EN55022 (radio bølge interferens), EN61000-6 (sikkerheden ved brug) Omgivelsestemperatur: 10oC - 40oC Radio-protokol: Z-Wave Plus Radio Frekvens 868 MHz (routing slave - øger dækningen af Z-Wave netværket) Antenne rækkevidde: op til ca. 150 meter ude, eller op til 30 meter inde (afhænger af bygnings struktur) Vis mere

Virker Med : Home Center Lite ( ? ) Home Center 2 ( ? ) HomeSeer ( ? ) HOMEY ( Nej ) Se mere her NEXA ( ? ) Razberry ( ? ) Vera ( ? ) Zipabox ( ? ) ZNet Lite V1/V2 ( ? ) HG2 ( ? ) Product information "Aeotec Home Energy Meter - three clamps GEN5 (60A)" These days you hear a lot about saving energy. Everybody knows that if we reduce the amount of energy we use we are not only able to save money but we also protect the environment. However, saving money by using less electricity is only possible if we understand when and how we use it. The Aeotec's Z-Wave Home Energy Meter provides you the possibility to understand that. Installed in an electricity box, the energy meter will monitor the total consumption of electricity used by an entire building. Its intelligent clamps will report this energy use in watts or kilowatt-hours to your Z-Wave gateway or controller, in watts or kilowatt-hours. Almost in real time you can see how much electricity you really use and when you use it. The main body is anchored using a back mount. The device has three clamps and reports W and kWH (up to 60 Ampere). Features: Clamp meter for electricity box 3 phase meter for max. 60 A Report in watts, kilowatt-hours and real time Power: 90...260 VAC, 50/60 Hz Measuring range of voltage: 220V~...260V~ Measuring range of current: 0...60A Operating Temperature: 0°C...40°C Protection Class: IP43 weatherporoof Wireless Technology: Z-Wave Plus Dimensions: 96 x 70 x 230 mm Article Dimensions (WxHxL)100 x 75 x 190 mm Package Dimensions (WxHxL)67 x 172 x 187 mm Article net weight0.510 Kg Article gross weight0.510 Kg Z-Wave Plus WEEECE Introduction To Z-Wave Plus™ Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enh...Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( ? ) HOMEY ( ? ) NEXA ( ? ) Razberry ( JA ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( ? ) HG2 ( ? ) Samsung SmartThings ( JA ) Product information "Aeotec WallMote - Remote Switch with 2 Buttons" By using Aeotec WallMote you can control devices and scenes in your smart home easily and intuitive – at the wall as well as in your hand. The WallMote by Aeotec is a fixed 2-button wall switch and portable remote control in one. The device can control other devices such as wall sockets, blinds, dimmers, lights, electronic door locks, scenes and many more. Aeotec WallMote can trigger corresponding functions by one single click. Furthermore, it masters the so called „sliding“. This touch control system allows you to swipe with a single finger across the relevant area on the WallMote to dim the lights by intuition for instance. The battery powered touch switch comes with a magnet that enables keeping the device in the respective wall mount. In this way, WallMote becomes a wall switch. You also can take the device away and use it as a portable remote control. Features: Wireless control with 2 touch areas (‚Buttons‘) Slider function Vibration feedback while operation Integrated color LED display status Built in Rechargeable battery, which can be charge via Micro-USB Wireless Technology: Z-Wave Plus Dimensions: 76 x 76 x 11 mm Scope of Delivery: Touch wireless switch Wall mount Mounting material Article Dimensions (WxHxL) 76 x 76 x 11 mm Package Dimensions (WxHxL) 91 x 110 x 17 mm Article net weight 0.00007000000000000001 Kg Z-Wave Plus WEEE CE Aeotec WallMote user guide. Aeotec Wallmote has been crafted to control connected lighting using Z-Wave Plus. It is powered by Aeotec’s Gen5technology. You can find out more about Wallmote by following that link. To see whether Wallmote is known to be compatible with your Z-Wave system or not, please reference our Z-Wave gateway comparison listing. The technical spe...Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( ? ) HOMEY ( JA ) NEXA ( ? ) Razberry ( JA ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( ? ) HG2 ( JA ) Samsung SmartThings ( JA ) Nano lysdæmper Gør alt dit lys til smart lys. Ganske enkelt. Nano Dimmer dramatisk forbedrer belysningen i dit hjem. Vores 3. generation af usynlig belysning controller udkonkurrerer alle, der er kommet før det. Dæmpning er glattere. Kompatibilitet er bredere. Belysning er hurtigere og mere lydhør. Automation og intelligens har aldrig været mere kraftfuld. Og det kommer i sådan en lille størrelse, som du vil blive overrasket over, hvor meget funktionalitet der er i denne. Perfekt belysning er en del af enhvert intelligente hjem. Belysning, der er lydhør. Det er altid har den rigtige lysstyrke. Det er altid tændt, når du har brug for det, og slukker, når du ikke. Men perfekt belysning har aldrig været let. Perfekt belysning har tidligere været kompliceret at opnå. I fortiden, skulle man bekymre sig om, hvilken type ledninger du har, uanset om din belysning er bagkant eller forkant dæmpet , og uanset om du bruger TRIACs eller tyristorer. Alt for kompliceret. Dette problem er væk. Nano Dimmer tilbyder intelligent, tilsluttede belysning uden nogen form for besvær. Let at installere. Nano Dimmer lader dig tilføje nye og eksisterende lys til dit Z-Wave-system. Det gør dit lys smartere. Det gør dem lydhøre. Det giver dig mulighed for at kontrollere dem, tidsplan, dæmp dem og lysne dem. Alle, der styrer og intelligens kommer fra blot ledningsføring bag en eksisterende vægkontakt eller i lampesteder mm. Nano lysdæmper. Levende Neutral (valgfrit) belastning Kontakt Den bedste kompatibilitet endnu. Pære kompatibilitet plejede at være kompliceret. Nu har det aldrig været nemmere. Drevet af både sin dedikerede Lighting Motor og en dedikeret 32-bit CPU, Nano Dimmer beregner belysning på uovertrufne hastigheder. Den beregner helt glat dæmpning, og det beregner perfekt pære kompati...Vis mere

Product information "AOETEC - Nano Shutter" Close your motorized windows automatically if it starts raining or shut down your shades if it is to warm outside. The Aeotec Nano Shutter enables you to control a broad selection of devices wirelessly and intelligently. The module equips motors for shutters, shades, garage doors, venetian blinds, etc. with Z-Wave technology. Thus, shutters and venetian blinds can be controlled both wirelessly via Z-Wave commands and locally via the connected conventional wall switch. The Aeotec Nano Shutter is designed to be mounted inside a flush mounting box, hidden behind a conventional wall switch. Features: Precise motor positioning Integrates shutters, shades, skylights, gates, etc. into Z-Wave network Voltage: 120VAC - 240VAC, 50Hz - 60Hz Total current amperage: 2x 2.5A Wireless technology: Z-Wave Plus Article Dimensions (WxHxL) 44 x 40 x 20 mm Package Dimensions (WxHxL) 73.67 x 34.8 x 74.1 mm Article net weight 0.034 Kg Article gross weight 0.059 Kg Z-Wave Plus Z-Wave S2 WEEE CE IP-Rating IP20 Compatibility list Z-Wave Controller Controller Revision Article Revision Compatibility status Comment FIB_HOMEC2 4.150 2.2 fully compatible FIB_FGHCL 4.170 2.2 fully compatible POPE011801 2.3.8 2.2 fully compatible ZMEEUZBWAY 2.3.8 2.2 fully compatible MCVEVERA_PLUS 1.7.4001 2.2 fully compatible ZMEEUZBWD 2.3.8 2.2 fully compatible ZMEERAZ2 2.3.8 2.2 fully compatible ZMEEUZB1 2.3.8 2.2 fully compatible ZIPEMICRO 1.3.13 2.2 fully compatible ZIPETILEZIG-B 1.3.13e 2.2 fully compatible ZIPETILEZIG-W 1.3.13e 2.2 fully compatible HOMEE-0002 2.21.0 2.2 fully compatibleVis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( JA ) HOMEY ( NEJ ) NEXA ( ? ) Razberry ( JA ) Vera ( JA ) Zipabox ( ? ) ZNet Lite V1/V2 ( JA ) HG2 ( JA ) Product information "Aeonlabs Minimote" The Aeotec (Aeon Labs) Minimote remote control can control a variety of Z-Wave compatible devices such as switches, dimmers or window blinds. The device can include and exclude devices, group them and set and release associations. Minimote is designed clear and simple, but owns a lot of functions with its four action buttons. Behind a slider, there are four more dedicated buttons for Z-Wave network control (Inclusion, Exclusion, Association, Learning). The Aeotec Minimote is an ideal small and portable Z-Wave controller for users, who don’t want to operate either a sophisticated pc control or realize complex automation scenes. A non-replaceable but rechargeable battery powers the remote control. Recharging is done on a conventional USB bus using the charging cable provided. Features: 4-button remote control Dedicated buttons for controller functions (Inclusion, Exclusion, Association, Learning) Compact housing Simple device control without Z-Wave gateway Power Supply: Fixed battery (rechargeable via USB) Wireless Technology: Z-Wave Vis mere

Virker Med : Home Center Lite ( Nej ) Home Center 2 ( JA ) HomeSeer ( JA ) HOMEY ( JA ) NEXA ( ? ) Razberry ( JA ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( JA ) HG2 ( ? ) The Aeon Labs KeyFob is a Z-Wave Remote Control, which features all the functionality of larger Z-Wave remote controls into a smaller, more modern design. Because of its small size it can be fit on a keyring and taken anywhere with you. This Key Fob Remote Control can be set up as the primary controller of a Z-Wave network or as an additional Z-Wave controller. This is perfect for including it as a remote control in an existing Z-Wave network. This device operates in two distinct modes: setup and use. Each of the four buttons on the Key Fob can control multiple Z-Wave devices with a simple push and can control up to 8 different scenes. When included securely the device is able to accept secure commands and to send secure commands to other devices. It is powered by an internal lithium cell CR2450 3V battery. Introduction To Z-Wave Plus™ Z-Wave Plus™ is a new certification program designed to help consumers identify products that take advantage of the recently introduced 'Next Gen' Z-Wave hardware platform, also know as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up. Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the Next-Gen, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities, including increased range, extended battery life, Over The Air upgrading (OTA), additional RF channels and more -- all of which are fully backwards compatible with existing Z-Wave products. For consumers, homeowners, integrators, and service providers, these enhancements offer tremend...Vis mere

Compatibility list Z-Wave Controller Controller Revision Article Revision Compatibility status Comment FIB_HOMEC2 4.530 1.2 partly compatible no color selection possible, warm white cannot be used independently FIB_FGHCL 4.530 1.2 partly compatible no color selection possible, warm white cannot be used independently POPE011801 2.3.8 1.2 fully compatible POPEHOME 040126 1.2 partly compatible no color selection possible, warm white cannot be used independently ZMEEUZBWAY 2.3.8 1.2 fully compatible MCVEVERA_PLUS 1.7.4001 1.2 fully compatible https://aeotec.freshdesk.com/support/solutions/articles/6000171018-using-led-strip-with-vera-gateway- ZMEEUZBWD 2.3.8 1.2 fully compatible ZMEERAZ2 2.3.8 1.2 fully compatible ZMEEUZB1 2.3.8 1.2 fully compatible ZIPEMICRO 1.3.13 1.2 fully compatible ZIPETILEZIG-B 1.3.13e 1.2 fully compatible ZIPETILEZIG-W 1.3.13e 1.2 fully compatible Virker Med : Home Center Lite ( Nej ) Home Center 2 ( Nej ) HomeSeer ( ? ) HOMEY ( JA ) NEXA ( ? ) Razberry ( JA ) Vera ( ? ) Zipabox ( JA ) ZNet Lite V1/V2 ( ? ) HG2 ( ? ) Samsung SmartThings ( Ja ) Product information "Aeotec LED Strip 2.4" NOTE: This product is the follow-up product of the AEOEZW121 and replaces this product as of now. The only difference in the features is the length of the LED Strip. Paint your home in new light and choose from more than 16 million colors the perfect shade that meets your mood. Your home is no longer decorated with just furniture and and photos – use the power of light. The LED Strip by Aeotec is the first ready-to-use Z-Wave LED Strip for Smart Homes. After mains connection, it can be included to a Z-Wave network. Switch the LED Strip via wireless switch, smartphone or sensor controlled and change the shade of a color anytime from anywhere. The Aeotec LED Strip has separate warm white, cold white and color LEDs which has a higher quality than ordinary LED stripes.Furthermore, the Aeotec LED Strip is not only dedicated to your home four walls, it is also suitab...Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( JA ) HOMEY ( JA ) NEXA ( ? ) Razberry ( ? ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( JA ) HG2 ( ? ) Samsung SmartThings ( Ja ) Smart Switch 6. Med USB lader og energimåling Smarter. Smaller. Smart sockets. Plug it into any power outlet in your home and that outlet is instantly smarter. Smart Switch 6 is a smart plug that lets you wirelessly control whatever is plugged into it. You can do that via remote control or a smart phone, and from an automation schedule or from the power outlet itself. Now your wall socket is smarter and connected. And because it’s truly smart, Smart Switch 6 offers much more than just wireless control. Wireless control. Control it via remote from up to 150 metres away from anywhere in the world via a smart phone or tablet. Smart Switch 6 can be controlled using secure and encrypted wireless technology. Babysitter. Control whatever is plugged into a Smart Switch 6 via a schedule and ensure that gaming systems and computers aren’t used when they’re not meant to be. Automation. Convenience. Cost savings. Our electronics don’t have to be turned on all the time, just the times we use them. Smart Switch 6 lets you automatically turn devices on or off according to a schedule you choose. Safety. Turn your electronics off in the event of an emergency or a hazard. Smart Switch 6 lets you automatically turn off devices, such as leaking air conditioners and fridges, when they fail. Spend less. Monitor and understand exactly how much money the devices plugged into Smart Switch 6 are costing you to run, then create a schedule to reduce your electricity bill. Protect devices. Your expensive electronics are safe with Smart Switch 6 courtesy of its inbuilt surge protector and over-current protector. Save on what you spend. Smart Switch 6 has world-class energy monitoring technology built right in. In real-time it can understand how much electricity your devices are using and let you ...Vis mere

Produktinformation "Aeotec Water Sensor Dock" Med Aeotec Water Sensor 6 er du beskyttet mod vandskader. Denne enhed er allerede fantastisk, men med denne Water Sensor Dock bliver den endnu mere brugbar. Installationen af Dock har flere fordele for dig. For det første har du mulighed for at overvåge to forskellige områder i en afstand af 1m fra vandføleren. Tilslut de to medfølgende spyd sensorer til docken, og derefter kan du overvåge separate områder. Så du forstørrer også niveauet af sikkerhed. For det andet kan du bruge docken til fast strømforsyning for vandføleren. Tilslut det medfølgende USB-kabel til docken, og vandføleren 6 behøver ikke længere batterierne. Funktioner: Docking station for vandføler 6 Udvider området ca. 1 m væk fra vandføler 6 To separate områder kan styres af to spyd sensorer kan forsynes med USB-kabelVis mere

Product information "Aeotec LED Strip Extension 1.2m" The length of the Aeotec LED Strip (AEOEZW121-2) is not long enough for you to create the perfect room atmosphere? No problem! Thanks to the Aeotec LED Strip Extension 1.2m which is separate available, you can easily extend the main LED Strip. A 6-pin connector makes installation quick and easy.Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( ? ) HOMEY ( ? ) Se mere her NEXA ( ? ) Razberry ( JA ) Vera ( ? ) Zipabox ( ? ) ZNet Lite V1/V2 ( ? ) HG2 ( ? ) HOMEE-0002 ( ? ) Smartthings ( JA ) Openhab ( ? ) Indigo ( ? ) Domoticz ( ? ) Product information "Aeotec NanoMote Quad" Apps are not always comfortable, voice control is not always available - the Aeotec NanoMote is always there! With the Aeotec NanoMote you control devices and scenes in your intelligent home easily and intuitively - on the wall and in your hand - with one or four buttons. The NanoMote Quad from Aeotec is a stationary 4-button wall switch as well as a portable remote control, which can be integrated into an existing Z-Wave network as a secondary controller for wireless control of devices and scenes. The Aeotec NanoMote sends commands to the Z-Wave gateway and controls electronic devices, shutters and blinds or lamps. The Aeotec NanoMote Quad controls up to 15 automated scenes. The battery-operated device can be wall mounted or used as a portable remote control. It can also be used as a pendant on your key ring or car key. In order to avoid unintentional triggering, the Aeotec NanoMote has a locking function which is triggered by a predefined combination of keystrokes. Features: Remote control with four buttons Can be used as a portable remote control or as a permanently installed wall switch Control of devices and up to 15 scenes Locking of the NanoMote by predefined keystroke combination to avoid unintentional triggering Battery-operated (rechargeable via USB cable) Wireless technology: Z-Wave Plus Article Dimensions (WxHxL) 50 x 50 x 14 mm Package Dimensions (WxHxL) 67 x 78 x 34 mm Article net weight 0.026 Kg Article gross weight 0.065 Kg Z-Wave Plus Z-Wave S2 WEEE CE IP-Rating IP20 Compatibility list Z-Wave Controller Controller Revision Article Revision Compatibility status Comment FIB_HOMEC2 4.550 1.2 fully compatible POPEHOME 040203 1.2 fully compatible ZMEERAZ ...Vis mere

Virker Med : Home Center Lite ( ? ) (no cold white via UI element) Home Center 2 ( ? ) (no cold white via UI element) HomeSeer ( ? ) HOMEY ( ? ) NEXA ( ? ) Razberry ( ? ) Vera ( ? ) Zipabox ( ? ) ZNet Lite V1/V2 ( ? ) HG2 ( NEJ ) Samsung SmartThings ( Ja ) Product information "AEOTEC LED Bulb 6 Multi-White (E27)" The smart AEOTEC LED Bulb 6 Multi-White turns your home lights into smart lights. The LED bulb fits into every E27 bulb holder. It can be connected to a Smart Home gateway via Z-Wave wireless technology after being connected to mains power. The required Z-Wave chip is already integrated into the bulb’s housing. You can vary brightness and light color easily via remote control, smartphone or table. Daylight, candle light or a mixed white: As of now you can define light atmosphere according to your wishes and requirements. The multi-white edition of the LED Bulb 6 offers tunable, white light. Dependently to your mood you can use the full range of different types of white, like warm white at 2,700K and pure white up to 6,500K. Due to LED technology, power consumption is very low compared to conventional bulbs. The Aeotec bulb is as bright as a conventional 60W bulb, but needs only 9.5W. You can safe money and protect the enviroment because the LED bulb has got a life time of up to 25,000 hours. Features: Dimmable LED bulb offers warm and cool shades of white (2,700K to 6,500K) Light Appearance: 2700K to 6500K Brightness: 806 lumens CRI: 80 Input: 220-240V, 50Hz Lamp for E27 socket Power Consumption: max. 9.5 W Angle of radiation: 240° Wireless Technology: Z-Wave Plus Article Dimensions (WxHxL)60 x 120.1 x 60 mm Package Dimensions (WxHxL) 67.65 x 138.48 x 68.82 mm Article net weight 0.130 KG Article gross weight 0.166 Kg Z-Wave Plus Introduction To Z-Wave Plus™ Z-Wave Plus™ is a new certification program designed to help consumers identify products that take advantage of the recently introduced 'Next Gen' Z-Wave hardware platform, also know as 500 Series or ...Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( JA ) HOMEY ( JA ) NEXA ( ? ) Razberry ( JA ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( JA ) HG2 ( JA ) Samsung SmartThings ( Ja ) Perfekt design . Er omkring 19 millimeter i bredden , nogle kalder den lille og kompakt . Vi foretrækker at kalde den usynlige. Det er en Z-Wave dør sensor, der simpelt hen er usynlig, ikke lige som andre følere der tit falder i øjnene med deres plastic look som synligt er monteret på døre.. A eotec s Forsænkede dørsensor er så smukt som resten af dit hjem . Du vil aldrig se den , men bare føle dens fordele. Enkel at installere. Skønheden i en usynlig installation suppleres af skønheden i en enkel installation . Installationen af den Forsænkede Dørsensor er nemt. Tilføje den til dit hjem netværk kræver ikke mere end at aktivere sit batteri og synkronisering med dit Z-Wave -systemet. At gøre det hele usynlig betyder ikke mere end at bore et lille hul der er gemt væk på toppen af din dør. Det er en installation , der tager ikke mere end 10 minutter, men giver års værd af ydelser. Simpel idé . Stærke applikationer . Dørsensor er en simpel idé. Den fortæller dig og dit Z-Wave netværk, hvis en dør er åben eller lukket . Enkle, men kraftfulde, forsænket Dørsensor giver dig mulighed for at oprette et helt nyt niveau af kontrol gennem Z- Wave. Alarmer. Sikkerhed . Intelligens . Automatiserede beslutninger. Alle muliggjort af en enkel, effektiv og usynlig enhed. Z-Wave kompatible. Trods sin lille størrelse, er dørsensorens trådløse kommunikation drevet af den samme kraftfulde teknologi, som understøtter meget af Aeotec hjem automation Z- Wave. Udformet i hver enhed den lille Z-Wave chippen tilbyder energibesparende kommunikation over en afstand på op til 300 fod / 91 meter . TEKNISKE DATA: Battery type: lithium cell CR2, 3 Volt battery, 800 mAh Battery leve tid : ca 1 år Radiofrekvens : 868 MHz for EU Driftsområde : op til 90 m indendørs Mål (L x B ) : 19 x 67mm Husk at kon...Vis mere

Product information "Aeotec Button" With the Aeotec Button you complete your bell system. The Button triggers your Aeotec Doorbell 6 or Siren 6 to ring by sending a 433MHz signal. You can link up to three buttons to a Doorbell to cover different home entrances. Due to the battery operation, which is very long-lasting with approx. 2 years, the installation is very easy with two small screws or even double-sided adhesive tape at any place (up to 90m away from the Aeotec Doorbell 6/Siren 6). Features: Action button for Aeotec Doorbell 6 and Siren 6 Simple installation with adhesive tape Battery operated Up to 2 years battery life Can be mounted up to 90m away from Doorbell 6 or Siren 6 3 Buttons per Doorbell 6 or Siren 6 Wireless technology: 433MHz Article Dimensions (WxHxL) 38 x 85 x 15 mm Package Dimensions (WxHxL) 64 x 103.5 x 26.5 mm Article net weight 0.031 Kg Article gross weight 0.059 Kg WEEE CE IP-Rating IP55Vis mere

Virker Med : Home Center Lite ( ? ) Home Center 2 ( ? ) HomeSeer ( ? ) HOMEY ( JA ) NEXA ( ? ) Razberry ( ? ) Vera ( ? ) Zipabox ( JA ) ZNet Lite V1/V2 ( ? ) HG2 ( ? ) Samsung SmartThings ( Ja ) Smaller, but smarter The Smart Dimmer 6 is an intelligent adapter plug which can be switched and dimmed by mobile remote control, wall switch, smartphone or through automation. Thanks to Z-Wave the Smart Dimmer 6 is more than an ordinary socket. The Smart Dimmer 6 owns a superb energy monitoring which provides consumption data of the connected device in real-time to your Z-Wave control center. This data can be stored also to present it in a history diagram later. Besides a colored LED ring at the Smart Dimmer shows the energy consumption of the connected device. The LED ring can be configured as follows: Disabled: The LED ring is switched off permanently Bicolored: Blue shows that the connected device is switched on; White shows that it is switched off 16 milion colors: Colors vary from Blue to Yellow, Green up to Red (Blue shows low, Red shows high energy consumption of the connected device.) The Smart Dimmer 6 has a dimension of only 58 x 58 mm and is therewith 43% smaller than its forerunner - however it is smart and practical. In a time when tablets, smartphones and many other devices can be charged with power via USB it is obvious that Smart Dimmer 6 owns an additional USB port alongside. The Smart Dimmer 6 works with the newest Z-Wave 500 chip generation and can dimm devices up to 2.5A / 550 watt. Smart Dimmer 6. Lamp light. Perfected. Smart dimmer. Lamps aren’t just decorations in the home; they’re a functional and frequent part of the day. Used to avoid flooding a room with ceiling lights. Used to read by. Used as the backdrop for a movie. The lamps we have and how we use them are as personal and individual as the décor they’re a part of. Smart Dimmer 6 has been crafted to subtly modernise the lamps in your home, making them smarter. Dimming. It’s not enough to fi...Vis mere

Produktinformation "AEOTEC Dimmer Bypass" Bypass bruges med Nano Dimmer hvis der er et for lavt Watt forbrug tilsluttet. Giver også en bedre dæmpning Article Dimensions (WxHxL) 26.85 x 100 x 12 mm Package Dimensions (WxHxL) 37.85 x 71 x 18.44 mm Article net weight 0.01 Kg Article gross weight 0.01575 KgVis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( ? ) HOMEY ( JA ) NEXA ( ? ) Razberry ( JA ) Vera ( Delvis ) Se Mere HER Zipabox ( JA ) ZNet Lite V1/V2 ( JA ) Et Lua-script for at modtage scenekommandon findes her: http://telld.us/ip5l5 HG2 ( JA ) Samsung SmartThings ( JA ) Product information "Aeotec WallMote Quad - Remote Switch with 4 Buttons" By using Aeotec WallMote you can control devices and scenes in your smart home easily and intuitive – at the wall as well as in your hand. The WallMote Quad by Aeotec is fixed 4-button wall switch and portable remote control which can be integrated in an existing Z-Wave network as secondary controller and will work as wireless control for devices and scenes as well. The Aeotec WallMote sends commands to the Z-Wave controller and also controls by that defined devices and scenes. Aeotec WallMote can trigger corresponding functions by one single click. Furthermore, it masters the so called „sliding“. This touch control system allows you to swipe with a single finger across the relevant area on the WallMote to dim the lights by intuition for instance. The battery powered touch switch comes with a magnet that enables keeping the device in the respective wall mount. In this way, WallMote becomes a wall switch. You also can take the device away and use it as a portable remote control. Features: Wireless control 4 four touch areas (‚Buttons‘) Control of devices and scenes Slider function Vibration feedback while operation Integrated color LED display status Wireless Technology: Z-Wave Plus Scope of Delivery: Touch wireless switch Wall mount Mounting material Familiarize yourself with your WallMote Quad. 1. WallMote Quad 2. Back-Mount plate 3. Double-Sided tape 4. Micro USB cable Note: When the WallMote is placed on somewhere, keep the glass button surface upward direction and no other physical surface or desktop contact with the glass button surface to avoid false triggering and battery consumption. Quick sta...Vis mere

Virker Med : Home Center Lite ( JA ) (no cold white via UI element) Home Center 2 ( JA ) (no cold white via UI element) HomeSeer ( ? ) HOMEY ( ? ) NEXA ( ? ) Razberry ( ? ) Vera ( ? ) Zipabox ( ? ) ZNet Lite V1/V2 ( ? ) HG2 ( NEJ ) Samsung SmartThings ( Ja ) With AEOTEC’s new and smart RGB bulb color comes into play. The Aeotec bulb fits into every E27 bulb holder and connects to a smart home center through Z-Wave wireless technology. It is able to vary brightness and light color as well. Daylight, candle light or party atmosphere: As of now you can define light atmosphere according to your wishes. The bulb uses 15 different LED diodes to shine in perfect shading of natural white light. These 15 diodes confer light temperature of 2580-7050K on the LED bulb. Cold white: 4745K to 7050K Natural white: 3710K to 4745 K Warm white: 2580K to 3710K Well-known manufacturers such as Samsung and Philips also use the same LED technology. An additional row with diodes gives Aeotec’s bulb the opportunity to vary between 16 million colors. Furthermore the bulb can be switched on and off time-controlled via defined scenes or by a motion sensor. Use your Aeotec bulb as notification or status LED. Installed in the corridor it could flash in red color if you want to leave your home and windows or terrace door are still open. Due to LED technology power consumption is very low compared to conventional bulbs. The Aeotec bulb is as bright as a conventional 70W bulb, but needs only 9W. Features: As bright as 70W with only 9W energy consumption For indoor and outdoor use Act as Z-Wave repeater Angle of radiation: 180° Article Dimensions (WxHxL)60 x 120.1 x 60 mm Package Dimensions (WxHxL)68.41 x 137.62 x 66.62 mm Article net weight 0.133 KG Article gross weight 0.166 Kg Z-Wave Plus Introduction To Z-Wave Plus™ Z-Wave Plus™ is a new certification program designed to help consumers identify products that take advantage of the recently introduced 'Next Gen' Z-Wave hardware platform, also k...Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( ? ) HOMEY ( ? ) NEXA ( ? ) Razberry ( ? ) Vera ( JA ) Zipabox ( ? ) ZNet Lite V1/V2 ( ? ) HG2 ( ? ) Samsung SmartThings ( ? ) Manual (English) Product information "Aeotec Radiator Thermostat" Save up to 30% energy costs by upgrading your Smart Home with the Aeotec Radiator Thermostat. A smart heating control system is comfortable, flexible and efficient at the same time. Due to intelligent automation, you can use the thermostat to set any room in your house to your preferred temperature. Change the temperature, anytime and anywhere. Thanks to wireless Z-Wave connection and FLiRS technology the Radiator Thermostat reacts immediately to any temperature setting which is sent from your Smart Home Gateway. The illuminated LED screen and buttons also allow you to control your desired temperature manually. No wiring or special tools are required to install the Aeotec Radiator Thermostat. The thermostat fits all M30 x 1.5mm radiator valves. Various adapters for RAV, RAL and RAVL valves are included. Features: Radiator Thermostat with FLiRS support Built-in temperature sensor Illuminated LED screen Temperature boost function Automatic open window detection (depends on position of radiator) Battery Lifetime: 6-12 months (depends on usage) Z-Wave Plus (FLiRS function) S2 Unauthenticated Scope of delivery: 1x Aeotec Radiator Thermostat, 2x batteries (AA), adapters for RAV, RAVL & RAVis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( JA ) HOMEY ( JA ) NEXA ( ? ) Razberry ( JA ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( JA ) HG2 ( ? ) Samsung SmartThings ( Ja ) Product information "Aeotec Indoor Siren with Backup Battery" The Aeotec indoor siren is an easy to install Z-Wave device which increases security in your home in no time. The siren will be plugged into an E27 socket and included into a Z-Wave network in few steps. This way, the siren will become part of your security system and can be activated by various alarm scenes such as burglary, fire and flood alarm. The compact indoor siren alarms with three-step adjustable loudness with up to 106 dB and red LEDs as additional optical signal. The modifiable loudness allows to use the siren also as a doorbell extension, e.g. to extend the bell signal for hard to reach areas. A special security feature is the integrated backup battery. With this battery the siren stays active, even in case of a power failure or when a burglar removes the siren from the power socket. Features: Indoor siren for E27 power sockets Compact and modern style design Three-step adjustable loudness Max. loudness: 106 dB 5 different alarm tones Backup battery Easy installation Wireless Technology: Z-Wave Plus Dimensions: 84x57x67 mm Siren for indoors. Sirens have always been designed to be installed outside your home. No more. Now the perfect accessory for your safety and security comes indoors. Plugin. No more wires. No more expensive installations. Setting up Siren couldn’t be simpler. Select where you want it to be in your home and plug it in to a power outlet. Up to 106dB. Siren has to immediately alert you to emergencies and safety problems. So that you always hear it, it has a high-intensity, 106dB speaker built right in. Visual alerts. It’s not just Siren’s audio alerts that are helping to keep you safe. Siren is enhanced with visual alerts courtesy of 3 powerful, front-facing LEDs. Siren for al...Vis mere

Virker Med : Home Center Lite ( JA ) Home Center 2 ( JA ) HomeSeer ( JA ) HOMEY ( ? ) NEXA ( JA ) Razberry ( JA ) Vera ( JA ) Zipabox ( JA ) ZNet Lite V1/V2 ( JA ) HG2 ( JA ) Samsung SmartThings ( Ja ) produkt information Aeotec ZW120 af Aeonlabs er en Generation 5 Z-Wave og Z-Wave Plus dør / vindue sensor designet til at arbejde med de fleste Z-Wave automationscontrollere. Som Gen5 enhed, det giver overlegen batterilevetid og rækkevidde og kan tilføjes som enten en sikker enhed eller standard enhed. ZW120 virker med Vera, Hometroller / HomeSeer, Smartthings, Zipato og bør arbejde med de fleste andre Z-Wave certificerede controllere, men tjek med controller producenten i tvivlstilfælde. Bidirectional monterings plade og trykknap giver mulighed for nemt installation og konfiguration sammen med din z-wave controler. Aeon Labs D / W Sensor har også sabotage forebyggelse og lav batterispændings advarsler. Aeon Labs Aeotec ZW120 Features: Z-Wave og Z-Wave Plus aktiveret Gen5 Z-Wave Plus Technology Sikker og Regelmæssig Z-Wave indskrivning & drift understøttes Fungerer ved hjælp af 2 x AAA batterier Typisk batterilevetid omkring 1 år indendørs brug Inkluderer sensor, magnet, montering tape, monteringsskruer Meget diskret design ( hvid ) - 2.0cm x 3.4cm x 7.9cm (hoveddelen) Compatibility list Z-Wave Controller Controller Revision Article Revision Compatibility status Comment POPE008900 2.3.4 1.5 fully compatible POPE011801 2.3.4 1.5 fully compatible ZMEEUZBWD 2.3.4 1.5 fully compatible ZMEEUZB1 2.3.4 1.5 fully compatible ZMEEUZBWAY 2.3.4 1.5 fully compatible ZMEERAZ2 2.3.4 1.5 fully compatible ZIP_Zipabox-G1 1.0.17 1.5 partly compatible no security tamper key element FIB_FGHCL 4.130 1.5 fully compatible FIB_HOMEC2 4.130 1.5 fully compatibleVis mere