Trotec Indeklima

Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry. Anniversary offer until 31 December 2026 — free HEPA H14 filter: order two TAC V+ TOWER, TAC M or TAC M TOWER (any combination), add the original HighFlow HEPA H14 filter to your basket, and its price is deducted in full at checkout. No code needed. Alternatively, the code TAC100 takes EUR 100 off any two TAC machines from our Special Deals. The two offers cannot be combined. Filters included — ready to run: the heat-resistant HEPA H14 main filter and the F7 pre-filter are installed ex works, so the unit is operational straight out of the packaging. The matching original replacement is the HighFlow HEPA H14 metal-frame filter (Art. 7.160.000.106) — see the filter photo in the gallery. The TROTEC TAC M is a mobile professional air-cleaning unit that delivers up to 1,200 m³/h of HEPA H14-filtered clean air. FlowMatic constant-volume regulation holds the delivered air rate steady as the filter loads, and a programmable touchscreen with PIN lock keeps settings under control. This first-generation model is recognisable by its distinctive front filter mesh, and its wheeled chassis lets a single operator move it between rooms. How it works The TAC M cleans purely by mechanical HEPA H14 filtration. Room air is drawn through an F7 pre-filter, then forced through the heat-resistant certified HEPA H14 element, which separates 99.995% of airborne particles at the most-penetrating particle size — fine dust, aerosols and other airborne particles. FlowMatic regulation continuously adjusts fan speed so the clean-air volume stays constant even as the filter fills over its service life. Key benefits High clean-air output — 1,200 m³/h at H14, enough to serve large rooms and busy spaces. FlowMatic constant volume — delivered air rate stays steady across the whole filter life, no manual re-tuning. Programmable touchscreen — schedules and settings with a PIN lock to prevent tam

Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry. This package contains four identical TROTEC TTK 75 ECO dehumidifiers for building drying. Each unit removes up to 21 l/24h (20 l/24h at 30 °C / 80 % r.h.) with an air flow of 260 m³/h and is recommended for dry-keeping rooms up to 45 m² / 110 m³. With 20 kg, compact dimensions of 295 x 305 x 562 mm and a retractable metal carrying handle, each unit is carried rather than rolled, which helps on stairs, in attics, basements and narrow spaces. Hot gas defrosting keeps the units running in unheated rooms at low temperatures, and the built-in operating hours counter records how long each unit has run. The pack suits contractors who run several units at the same time, for example for screed and plaster drying, water damage restoration or rental. Pallet shipment: all four units are delivered together on one Euro pallet (1200 x 800 mm); the pallet delivery charge is shown at checkout. Please make sure the pallet can be received and unloaded at the delivery address. How it works The TTK 75 ECO works on the condensation principle: the fan draws humid room air through the air filter, the evaporator and the condenser. On the cold evaporator the air is cooled below its dew point, the moisture condenses and drips into the 4 l condensate tank, which is fitted with a float. The dried air is slightly warmed at the condenser and blown back into the room. According to the manual, the unit can lower the relative humidity to approx. 30 %. Operation is deliberately simple: the unit has an on/off switch, a tank indicator lamp and the operating hours counter, but no hygrostat, no timer and no display. After switching on, the unit starts dehumidifying in continuous mode; the compressor starts approx. 3 minutes later and the fan runs until the unit is switched off. The unit stops automatically when the tank is full or not inserted correctly. If the evaporator starts to ice up, a sp

Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry. This package contains four identical TROTEC TTK 171 ECO dehumidifiers for commercial use. Each unit removes up to 52 l/24h (51 l/24h at 30 °C / 80 % r.h.) with an air flow of 450 m³/h and is designed for rooms up to 90 m² / 230 m³. The pack suits contractors who run several units at the same time, for example for building drying, water damage restoration and the permanent dry-keeping of warehouses, archives and laboratories. Each unit has a hygrostat mode and a continuous mode, a 5.5 l condensate tank with a supplied 2 m drain hose, the natural refrigerant R290 and a radial fan whose air outlet takes an optional hose adapter for spot drying and cavity drying. Pallet shipment: all four units are delivered together on one Euro pallet (1200 x 800 mm). Please make sure the pallet can be received and unloaded at the delivery address. How it works The TTK 171 ECO works on the condensation principle: the fan draws humid room air through the air filter, the evaporator and the condenser. On the cold evaporator the air is cooled below its dew point, the moisture condenses and drips into the condensate tank, which is fitted with a float. The dried air is slightly warmed at the condenser and blown back into the room. According to the manual, the unit can lower the relative humidity to approx. 30 %. The easy-care control panel has a digital display and the keys Continuous, Minus, Plus, Timer and Standby, plus LEDs for Tank Full, Continuous mode, Defrost and Timer. In hygrostat mode you preselect the target humidity between 20 % and 90 % in 5 % steps; the display shows it together with the current value, and the unit runs until the target is reached and restarts when it is exceeded. In Continuous mode the unit dehumidifies permanently, independent of the room humidity, for example with the drain hose connected. The timer switches the unit on or off after 1 to 24 hours,

Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry. This package contains four identical TROTEC TTK 166 ECO commercial dehumidifiers. Each unit removes up to 52 l/24h (50 l/24h at 30 °C / 80 % r.h.) with an air flow of 300 m³/h and is designed for rooms up to 90 m² / 230 m³. The pack suits contractors who run several units at the same time, for example for new-build drying after screed and plaster work, water damage restoration or the permanent dehumidification of warehouses, archives and workshops. Every unit has a hygrostat-controlled automatic mode, a 7 l condensate tank with drain hose connection, the natural refrigerant R290 and a robust coated steel trolley in signal red. Pallet shipment: all four units are delivered together on one Euro pallet (1200 x 800 mm). Please make sure the pallet can be received and unloaded at the delivery address. How it works The TTK 166 ECO works on the condensation principle: the fan draws humid room air through the air filter, the evaporator and the condenser. On the cold evaporator the air is cooled below its dew point, the moisture condenses and drips into the condensate tank, which is fitted with a float. The dried air is slightly warmed at the condenser and blown back into the room. According to the manual, the unit can lower the relative humidity to approx. 30 %. Operation is via a control panel with POWER and TIMER keys, arrow keys and an LED display. The display shows the current relative humidity, the target humidity while it is being set, the room temperature, the timer hours, compressor and fan operation, a full or incorrectly inserted tank and the automatic defrosting. You set the target humidity between 10 % and 95 % in 1 % steps; the integrated hygrostat switches the compressor off when the target is reached and back on when the humidity rises again. The manual gives 30 % to 80 % r.h. as the range for effective dehumidification. The timer switches the unit

Available to order: typical lead time 5–10 working days. We confirm the exact date after your order or enquiry.The TROTEC TF-L 127 mm air hose is the flexible 6 m duct for the TTR 400, TTR 400 D and TTR 500 D desiccant dryers. Connected to the Ø 125 mm hose adapter or filter box on the process air inlet, or to the dry-air and regeneration connections, it routes the air exactly where it is needed: moist air in from a neighbouring room, dry air into a cavity or enclosure, humid regeneration air out of the building.Compatibility TROTEC TTR 400, TTR 400 D and TTR 500 D adsorption dehumidifiers TROTEC filter box process air inlet 6.100.010.210 Key features PVC-coated polyamide fabric — vibration resistant and flame retardant. Tight bending radius — 1 × diameter, easy to lay around corners. Wide temperature range — −5 °C to +80 °C, also for warm regeneration air. Technical data Article number: 6.100.001.120 Length: 6 m Outer diameter: 127 mm Temperature range: −5 °C to +80 °C Genuine original TROTEC part — supplied by BMB Rheinland, your authorised TROTEC distributor.Need a complete TTR accessory set or larger quantities? Request a quote.

Project item: typical lead time 2–4 weeks. We confirm the delivery date and configuration after your order or enquiry, and support you with sizing, framework agreements and tender documentation. Please confirm availability before ordering. This is a project unit supplied to order, not a shelf item. Email sales@bmbrheinlandgmbh.com with your quantity and delivery location and we will confirm the current availability and delivery date, normally within one business day. The TROTEC DH 160 BX is a heavy-duty stationary industrial dehumidifier for permanent, unattended humidity control in large industrial spaces. Extracting up to 245 litres per day with 2,200 m³/h of air circulation, it holds production halls, warehouses and technical buildings at a stable, defined humidity level around the clock — protecting stock, machinery and building fabric from moisture damage, corrosion and mould. How it works The DH 160 BX operates on the industrial refrigerant-condensation principle: humid air is drawn across the evaporator, moisture condenses out as water, and dry, slightly warmed air is returned — dependably, even at low ambient temperatures. Condensate is removed continuously through a fixed drain connection, and an external hygrostat (e.g. TROTEC HG 120/125) runs the unit only when humidity rises above your set point: genuine 24/7 operation with no supervision and no wasted energy. Key benefits High extraction on large volumes — up to 245 l/24 h keeps even multi-thousand-m³ buildings reliably dry Duct-ready installation — connects to duct systems or air hoses to deliver dry air exactly where it is needed Built for continuous industrial duty — robust housing, Made in Germany, engineered for years of permanent operation Protected central control panel — recessed controls shielded against knocks and dust in rough environments Service-friendly design — accessible components keep maintenance fast and downtime short Typical applications Production halls and warehouses with high air

Project item — available to order: typical lead time 2–4 weeks. We confirm the exact date and configuration after your order or enquiry, and support sizing, framework agreements and tenders. Please confirm availability before ordering. This is a project unit supplied to order, not a shelf item. Email sales@bmbrheinlandgmbh.com with your quantity and delivery location and we will confirm the current availability and delivery date, normally within one business day. The TROTEC DH 160 BX ES is a stationary industrial refrigerant dehumidifier engineered for permanent installation and round-the-clock duty, removing up to 245 litres of water per day while moving 2,200 m³/h of process air. Its defining feature is the AISI 316 stainless steel housing, which withstands chlorides and aggressive atmospheres — making it the right choice where standard painted steel would corrode. How it works The DH 160 BX ES works on the refrigerant condensation principle. A fan draws humid air across a cold evaporator coil, where the moisture drops below its dew point and condenses out as liquid water. The dried, slightly warmed air is then returned to the space and the collected condensate is drained away. This makes it highly effective at normal ambient temperatures in enclosed, continuously humid rooms. Key benefits AISI 316 stainless steel housing — very high corrosion resistance, especially against chlorides, for chemically demanding and wet environments. High extraction rate — up to 245 l/24h keeps large enclosed volumes reliably dry. Built for continuous duty — designed for unattended 24/7 operation in a fixed installation. Strong air movement — 2,200 m³/h circulation for even moisture control across the room. Three-phase power — 3×400 V supply for stable industrial-grade performance. Typical applications Waterworks, pump stations and technical rooms with high humidity loads. Hygiene-critical food and beverage production and cold-store areas. Swimming pool plant rooms and other chloride

Project item — manufactured to order: typical lead time 3–4 months, shorter where standard units are available. Configuration and manufacturer accessories are specified with your quotation; we support sizing, framework agreements and tenders, and confirm the exact schedule on order. Please confirm availability before ordering. This is a project unit supplied to order, not a shelf item. Email sales@bmbrheinlandgmbh.com with your quantity and delivery location and we will confirm the current availability and delivery date, normally within one business day. The TROTEC TTR 6600 is a large stationary adsorption (desiccant) dehumidifier for permanent, ducted installation on industrial-scale drying projects. Rated at a nominal 6,600 m³/h of dry air and up to 37.2 kg of moisture removed per hour, it is sized for extensive production areas and infrastructure where a low, uniform humidity level has to be guaranteed continuously. How it works The unit uses desiccant adsorption in place of refrigerant cooling. Process air is drawn through a slowly rotating rotor charged with hygroscopic silica gel, which binds the airborne moisture; on a separate sector a heated regeneration air stream reactivates the desiccant and discharges the moisture as humid exhaust. Rotor rotation makes the cycle continuous, so the TTR 6600 supplies dry air without interruption and reaches deep dew points even when the treated air is cold and already low in humidity. Key benefits Industrial-scale airflow — nominal 6,600 m³/h, up to 7,200 m³/h for extensive duct systems. High extraction rate — up to 37.2 kg/h to control humidity across large volumes. Reliable at low load — dew points stay stable in cold and lightly loaded conditions. Designed as fixed plant — permanent, ducted installation for uninterrupted process duty. Automation ready — BACnet and further integration options available on request. Made in Germany — supplied with full manufacturer documentation. Typical applications Large pharmaceutical,

Project item — manufactured to order: typical lead time 3–4 months, shorter where standard units are available. Configuration and manufacturer accessories are specified with your quotation; we support sizing, framework agreements and tenders, and confirm the exact schedule on order. Please confirm availability before ordering. This is a project unit supplied to order, not a shelf item. Email sales@bmbrheinlandgmbh.com with your quantity and delivery location and we will confirm the current availability and delivery date, normally within one business day. The TROTEC TTR 8200 is the largest stationary adsorption (desiccant) dehumidifier in this range, built for permanent, ducted installation on the most demanding industrial drying projects. With a nominal 8,200 m³/h of dry air and up to 46.2 kg of moisture removed per hour, it delivers maximum throughput for expansive facilities and central humidity-control systems that run continuously. How it works Like the rest of the TTR series, the 8200 dries by adsorption rather than condensation. Process air passes through a slowly rotating desiccant rotor loaded with hygroscopic silica gel, which draws the moisture out of the air stream; a heated regeneration stream simultaneously reactivates the rotor on a separate sector and expels that moisture as humid exhaust. The continuous rotor cycle provides an uninterrupted volume of very dry air and maintains deep, stable dew points at low temperatures and low relative humidity that lie beyond the reach of refrigerant dehumidification. Key benefits Maximum airflow in the range — nominal 8,200 m³/h, up to 9,000 m³/h for large central duct systems. Highest moisture removal — up to 46.2 kg/h for humidity control over very large volumes. Deep dew points — stable low-humidity output regardless of ambient temperature or load. Central process plant — designed for fixed, ducted installation in round-the-clock operation. Integration ready — BACnet and further connectivity options available o

Project item — manufactured to order: typical lead time 3–4 months, shorter where standard units are available. Configuration and manufacturer accessories are specified with your quotation; we support sizing, framework agreements and tenders, and confirm the exact schedule on order. Please confirm availability before ordering. This is a project unit supplied to order, not a shelf item. Email sales@bmbrheinlandgmbh.com with your quantity and delivery location and we will confirm the current availability and delivery date, normally within one business day. The TROTEC TTR 2800 is a stationary adsorption (desiccant) dehumidifier engineered for permanent, ducted installation in continuous industrial process drying. It delivers a nominal 2,800 m³/h of dry air and removes up to 15.7 kg of moisture per hour, holding stable low dew points even where the air is cold and already dry — precisely the conditions in which refrigerant dehumidifiers lose their effectiveness. How it works At the heart of the machine is a slowly rotating desiccant rotor impregnated with a hygroscopic silica-gel medium. The process air passes through one sector of the rotor, where water vapour is adsorbed onto the desiccant; a separate, heated regeneration air stream then drives that moisture back out of the rotor and carries it outside as humid exhaust. Because adsorption does not depend on condensation, the TTR 2800 continues to dry reliably at low temperatures and very low relative humidity, reaching dew points far below what a condensation dryer can achieve. Key benefits Deep, stable drying — maintains consistent low dew points independent of ambient temperature. Continuous process duty — engineered for round-the-clock operation rather than intermittent site drying. High air throughput — nominal 2,800 m³/h, with up to 3,150 m³/h available for ducted distribution. Permanent integration — designed for fixed installation with ducted process and regeneration air. Building-management ready — BACnet and

Project item — manufactured to order: typical lead time 3–4 months, shorter where standard units are available. Configuration and manufacturer accessories are specified with your quotation; we support sizing, framework agreements and tenders, and confirm the exact schedule on order. Please confirm availability before ordering. This is a project unit supplied to order, not a shelf item. Email sales@bmbrheinlandgmbh.com with your quantity and delivery location and we will confirm the current availability and delivery date, normally within one business day. The TROTEC TTR 10000 is a stationary desiccant dehumidifier engineered for round-the-clock industrial process drying, removing up to 55.1 kg of moisture per hour (1322.4 kg/24h at 20 °C / 60 % r.h.) from air volumes of up to 10,500 m³/h. It is built for permanently installed, ducted operation in pharmaceutical and food production, freeze-drying, dry storage and waterworks, where a stable low dew point must be held regardless of ambient temperature. How it works The TTR 10000 dries air by adsorption rather than by cooling. Process air is drawn through a slowly rotating desiccant rotor — a honeycomb matrix coated with silica gel — whose pores capture water vapour directly from the airstream. A separate, heated regeneration airstream continuously drives the captured moisture back out of the rotor and expels it outside, so the wheel is always ready to adsorb again. Because the process does not rely on condensation, it reaches very low dew points and stays effective at low temperatures and low relative humidity, where refrigerant dehumidifiers lose efficiency. As a stationary unit it is ducted into the building and sized for large, continuous air volumes. Key benefits Deep drying at low temperatures — desiccant adsorption holds a stable low dew point even in cold, dry conditions where condensation dryers fade. Built for continuous duty — engineered for 24/7 process operation at a nominal 9800 m³/h of dry air (up to 10500

Project item — manufactured to order: typical lead time 3–4 months, shorter where standard units are available. Configuration and manufacturer accessories are specified with your quotation; we support sizing, framework agreements and tenders, and confirm the exact schedule on order. Please confirm availability before ordering. This is a project unit supplied to order, not a shelf item. Email sales@bmbrheinlandgmbh.com with your quantity and delivery location and we will confirm the current availability and delivery date, normally within one business day. The TROTEC TTR 12000 is a stationary desiccant dehumidifier engineered for round-the-clock industrial process drying, removing up to 66.5 kg of moisture per hour (1596 kg/24h at 20 °C / 60 % r.h.) from air volumes of up to 12,500 m³/h. It is built for permanently installed, ducted operation in pharmaceutical and food production, freeze-drying, dry storage and waterworks, where a stable low dew point must be held regardless of ambient temperature. How it works The TTR 12000 dries air by adsorption rather than by cooling. Process air is drawn through a slowly rotating desiccant rotor — a honeycomb matrix coated with silica gel — whose pores capture water vapour directly from the airstream. A separate, heated regeneration airstream continuously drives the captured moisture back out of the rotor and expels it outside, so the wheel is always ready to adsorb again. Because the process does not rely on condensation, it reaches very low dew points and stays effective at low temperatures and low relative humidity, where refrigerant dehumidifiers lose efficiency. As a stationary unit it is ducted into the building and sized for large, continuous air volumes. Key benefits Deep drying at low temperatures — desiccant adsorption holds a stable low dew point even in cold, dry conditions where condensation dryers fade. Built for continuous duty — engineered for 24/7 process operation at a nominal 11800 m³/h of dry air (up to 12500

Project item — manufactured to order: typical lead time 3–4 months, shorter where standard units are available. Configuration and manufacturer accessories are specified with your quotation; we support sizing, framework agreements and tenders, and confirm the exact schedule on order. Please confirm availability before ordering. This is a project unit supplied to order, not a shelf item. Email sales@bmbrheinlandgmbh.com with your quantity and delivery location and we will confirm the current availability and delivery date, normally within one business day. The TROTEC TTR 800 is a stationary industrial desiccant (adsorption) dehumidifier for demanding continuous process duty, delivering a nominal 750 m³/h of dry air and up to 3.6 kg of water removal per hour. Unlike condensation units, it holds stable low dew points even at low temperatures and low humidity — the regime where refrigerant dryers lose efficiency. How it works The TTR 800 dries air by adsorption. Humid process air passes through a slowly rotating desiccant rotor that captures water vapour directly from the airstream. A separate heated regeneration airflow then drives the collected moisture back out of the rotor and expels it, so the rotor is continuously re-activated. Because drying does not depend on cooling below a dew point, the unit stays effective in cold and very dry conditions. Key benefits Deep, stable drying — maintains low dew points even at low temperature and low relative humidity. Continuous process capacity — up to 3.6 kg/h (86.4 kg/24h) moisture removal for round-the-clock operation. High dry-air output — 750 m³/h nominal, up to 950 m³/h maximum air volume flow. Building-management ready — integration options such as BACnet connectivity available on request. Three-phase industrial supply — 3/PE/380–480 V, 50–60 Hz for stable performance. Typical applications Pharmaceutical and food production requiring controlled low humidity. Freeze-drying and dry-storage processes. Waterworks and technica

Project item: typical lead time 2–4 weeks. We confirm the delivery date and configuration after your order or enquiry, and support you with sizing, framework agreements and tender documentation. Please confirm availability before ordering. This is a project unit supplied to order, not a shelf item. Email sales@bmbrheinlandgmbh.com with your quantity and delivery location and we will confirm the current availability and delivery date, normally within one business day. The TROTEC DH 310 BX is the high-capacity flagship of TROTEC's stationary industrial dehumidifier range. Extracting up to 500 litres per day with 4,600 m³/h of air circulation, it keeps very large halls, warehouses and process buildings at a stable, defined humidity level in continuous operation — dependable protection for stock, machinery and building fabric on an industrial scale. How it works The DH 310 BX works on the industrial refrigerant-condensation principle: humid air passes across the evaporator, moisture condenses out as water, and dry, slightly warmed air is returned to the space — reliably, even in demanding low-temperature conditions. Condensate drains continuously through a fixed connection, and an external hygrostat (e.g. TROTEC HG 120/125) keeps the unit running only when needed — true set-and-forget 24/7 humidity control. Key benefits 500 l/24 h industrial capacity — sized for very large air volumes that smaller units cannot hold dry Duct-ready installation — connects to duct systems or air hoses for targeted dry-air distribution Built for permanent duty — robust industrial construction, Made in Germany, engineered for years of continuous operation Service-friendly housing — wide-opening panels give fast access to all components, keeping maintenance downtime short Economical at scale — high water extraction per kWh keeps operating costs predictable on large sites Typical applications Large production and process halls with high, constant humidity loads Central warehouses and logistics

Project item — manufactured to order: typical lead time 3–4 months, shorter where standard units are available. Configuration and manufacturer accessories are specified with your quotation; we support sizing, framework agreements and tenders, and confirm the exact schedule on order. Please confirm availability before ordering. This is a project unit supplied to order, not a shelf item. Email sales@bmbrheinlandgmbh.com with your quantity and delivery location and we will confirm the current availability and delivery date, normally within one business day. The TROTEC TTR 5200 is a high-capacity stationary adsorption (desiccant) dehumidifier for permanent, ducted installation in demanding industrial process drying. With a nominal 5,200 m³/h of dry air and up to 29.1 kg of moisture removed per hour, it serves large volumes and multi-zone processes where humidity must be held low and steady around the clock. How it works Drying is achieved by adsorption on a rotating desiccant wheel rather than by condensation. As process air flows through the silica-gel-loaded rotor, moisture is bound onto the desiccant surface; a heated regeneration stream continuously reactivates the rotor on a separate sector and expels the captured water as humid exhaust. The result is a steady flow of very dry air and dependable performance at low temperatures and low relative humidity, where cooling-based dryers cannot maintain the required dew point. Key benefits High-volume drying — nominal 5,200 m³/h, up to 5,800 m³/h for larger duct networks. Strong moisture removal — up to 29.1 kg/h to hold low humidity across sizeable spaces. Temperature-independent results — stable dew points even in cold or lightly loaded conditions. Permanent process plant — designed for fixed, ducted installation in continuous duty. Integration ready — BACnet and further connectivity options available on request. Made in Germany — supplied with full manufacturer documentation. Typical applications Large-scale pharmaceuti

Project item — manufactured to order: typical lead time 3–4 months, shorter where standard units are available. Configuration and manufacturer accessories are specified with your quotation; we support sizing, framework agreements and tenders, and confirm the exact schedule on order. Please confirm availability before ordering. This is a project unit supplied to order, not a shelf item. Email sales@bmbrheinlandgmbh.com with your quantity and delivery location and we will confirm the current availability and delivery date, normally within one business day. The TROTEC TTR 2000 is a high-capacity stationary industrial desiccant (adsorption) dehumidifier for large-scale continuous process duty, delivering a nominal 2,000 m³/h of dry air and up to 10.8 kg of water removal per hour. It holds stable low dew points even at low temperatures and low humidity — the operating window where refrigerant dehumidifiers fall short. How it works The TTR 2000 dries air by adsorption. A large volume of humid process air passes through a slowly rotating desiccant rotor that binds water vapour directly from the airstream. A separate heated regeneration airflow continuously drives the captured moisture out of the rotor and expels it, keeping the rotor re-activated for uninterrupted drying. As drying is independent of cooling below a dew point, the unit performs reliably in cold and very dry conditions. Key benefits Deep, stable drying — maintains low dew points even at low temperature and low relative humidity. Very high continuous capacity — up to 10.8 kg/h (259.2 kg/24h) moisture removal for round-the-clock operation. Large dry-air output — 2,000 m³/h nominal, up to 2,350 m³/h maximum air volume flow. Building-management ready — integration options such as BACnet connectivity available on request. Three-phase industrial supply — 3/PE/380–480 V, 50–60 Hz for stable performance. Typical applications Large pharmaceutical and food production requiring controlled low humidity. Freeze-drying an